E 113 无定影器
E 510 激光器棱镜电机故障
E 511 电机 1 故障
E 512 P/H 电机故障
E 513 NVRAM 故障
E 516 双面单元故障(通信故障)
E 517 可选纸盒故障
E 520 二次转印故障(Advance)
E 521 二次转印故障
E 523 PCDC 故障
E 524 碳粉浓度过低
E 525 碳粉浓度过高
E 526 ADC 传感器脏
E 527 显影原位传感器故障
E 530 环境(湿度)传感器故障
E 531 PR 电机故障
E 532 P/H 电机2 故障
E 533 温度传感器故障
E 534 定影器故障(低温)
E 535 定影器故障(灯管)
E 536 定影器故障(超时)
E 537 定影器故障(过热)
E 543 后部风扇故障
E 544 定影器风扇2故障
E 545 定影器风扇1故障
E 546 双面单元电机故障
E 547 可选纸盒进纸电机故障
E 620 K 显影器寿命已到
E 621 C 显影器寿命已到
E 622 M 显影器寿命已到
E 623 Y 显影器寿命已到
E 624 转印皮带寿命已到
E 626 二次转印组件寿命已到
E 627 皮带刮板寿命已到
E 830 可选大容量纸盒LC3故障
E 831 可选纸盒LC2故障
E 832 多功能纸盒故障(下降)
E 833 多功能纸盒故障(抬起)
E 998 引擎通信错
英文版
521 2nd BTR error FIP-1.27 “2ND BTR Error” (p.220)
523 PCDC malfunction FIP-1.25 “PCDC Error” (p.219)
524 Toner density error (low density) FIP-1.24 “Low Density Error” (p.218)
525 Toner density error (high density) FIP-1.23 “High Density Error” (p.217)
526 Soiled ADC sensor FIP-1.22 “ADC Sensor Soiled”
(p.217)
527 Deve home position sensor error -
530 Environment (humidity) sensor error FIP-1.31 “Environment (Humidity)
Sensor Related Error” (p.224)
531 PR motor error FIP-1.19 “P/R MOT&DRV ASSY
Related Error” (p.214)
532 P/H motor 2 error " FIP-1.15 “P/H MOTOR ASSY
Related Error” (p.210)
533 Temperature sensor error FIP-1.29 “FUSER Overheat Error”
(p.222)
534 Fuser Unit error (low temperature) FIP-1.30 “FUSER Warm-up Error” /
“Heater Error”/ “FUSER Low
Temperature Error” (p.223)
535 Fuser Unit error (Heater lamp) FIP-1.30 “FUSER Warm-up Error” /
“Heater Error”/ “FUSER Low
Temperature Error” (p.223)
536 Fuser Unit error (time out) FIP-1.30 “FUSER Warm-up Error” /
“Heater Error”/ “FUSER Low
Temperature Error” (p.223)
537 Fuser Unit error (over heat) FIP-1.29 “FUSER Overheat Error”
(p.222)
543 Rear fan error FIP-1.34 “DEVE. FAN Error” (p.225)
Table 3-3. Service Call Errors (Engine Related) (continued)
ErrorCode
ggg
Explanation Refer to
544 Fuser Unit fan 2 error FIP-1.33 “FUSER CHUTE FAN
Error” (p.225)
545 Fuser Unit fan 1 error FIP-1.32 “FUSER FAN-1 Error”
(p.224)
546 Duplex Unit motor error *3
547 2/1 Optional Cassette Unit Feeder Motor
error
*3
620 K Development end FIP-1.35 “Life Error/Over/Warning”
(p.226)
621 C Development end FIP-1.35 “Life Error/Over/Warning”
(p.226)
622 M Development end FIP-1.35 “Life Error/Over/Warning”
(p.226)
623 Y Development end FIP-1.35 “Life Error/Over/Warning”
(p.226)
624 IBT end FIP-1.35 “Life Error/Over/Warning”
(p.226)
626 2nd BTR end FIP-1.35 “Life Error/Over/Warning”
(p.226)
627 IBT Cleaner end FIP-1.35 “Life Error/Over/Warning”
(p.226)
830 2 Optional Cassette Unit LC3 error (lift up) *3
831 1/2 Optional Cassette Unit LC2 error (lift
up)
*3
832 MP Tray error (lift down) FIP-1.44 “MSI Tray Malfunction (Lift
Down)” (p.232)
833 MP Tray error (lift up) FIP-1.43 “MSI Tray Malfunction (Lift
Up)” (p.231)
998 Engine communication error FIP-1.47 Engine Communication
Error (p.234)
Table 3-3. Service Call Errors (Engine Related) (continued)
Error
Code
ggg
Explanation Refer to