服务器所在的机房禁ping ，我如何监控服务器的情况 ？下面和大家介绍一个软件tcping，这个软件是针对TCP监控的，也可以看到ping 值，即使机房禁PING，服务器禁PING了，也可以通过它来监控服务器的情况。除了ping ，它还有一个功能，监听端口的状态。

方法

1、首先提供一下软件的下载地址：【打开这个地址便可以下载】

2、接下来介绍一下这个软件的用途，这个软件

一可以监听服务器的端口状态，默认是80端口的，也可以指定其它端口。

二可以看到ping 返回的时间，这样可以知道服务器是否有延时或者端口不通的状态。

3、软件的使用非常简单：

一、将下载的文件放在C:WINDOWSsystem32 目录下，就可以直接使用了。

二、在windows命令提示符里可以直接使用这个命令了，相关的参数可以自己查询一下，查询的命令是：tcping /?

三、简单地举两个例子的使用

tcping www.baidu.com

tcping -t www.baidu.com 【参数-t 是让命令一直运行ping 】

tcping -d -t www.baidu.com 【参数 -d 是显示时间，这样就可以更清楚了】

tcping -d -t www.baidu.com 21 【这里只是举例，21是您所需要监听的端口，这个可以行定义。】

可以看一下图

4、软件的使用还有很多的参数，常用的就上面两个参数，大家也可以在使用的过程中打个问号看一下就知道了

C:>tcping--------------------------------------------------------------

tcping.exe by Eli FulkersonPlease see for updates.--------------------------------------------------------------

Usage: tcping [-flags] server-address [server-port]Usage (full): tcping [-t] [-d] [-i interval] [-n times] [-w ms] [-b n] [-r times] [-s] [-v] [-j] [--tee filename] [-h] [-u] [--post] [--head] [-f] server-address [server-port]

-t : ping continuously until stopped via control-c

-n 5 : for instance, send 5 pings

-i 5 : for instance, ping every 5 seconds

-w 0.5 : for instance, wait 0.5 seconds for a response

-d : include date and time on each line

-b 1 : enable beeps (1 for on-down, 2 for on-up, 3 for on-change, 4 for always)

-r 5 : for instance, relookup the hostname every 5 pings

-s : automatically exit on a successful ping

-v : print version and exit-j [5] : include jitter. Optional argument controls rolling average size.

--tee : mirror output to a filename specified after '--tee'

-4 : prefer ipv4

-6 : prefer ipv6HTTP Options:

-h : HTTP mode (use url without http:// for server-address)

-u : include target URL on each line

--post : use POST rather than GET (may avoid caching)--head : use HEAD rather than GET--proxy-server : specify a proxy server--proxy-port : specify a proxy portDebug Options:

-f : force tcping to send at least one byte If you don't pass server-port, it defaults to 80.C:>

常用的几个参数都已经加粗了，各位有兴趣的网友可以再深入了解下的。蛮有用的一个小软件。

5、结尾：这个软件是用于windows平台的，当然linux 平台也有tcping 不过就需要编译安装后才能使用了。这是后话，有空再和大家分享一下，谢谢。

官方给出的使用方法:

NAME

tcping - simulate "ping" over tcp by establishing a connection to network hosts.

Measures the time for your system to [SYN], receive the target's [SYN][ACK] and send [ACK]. Note that the travel time for

the last ACK is not included - only the time it takes to be put on the wire a tthe sending end.

SYNOPSIS

tcping [-tdsvf46] [-i interval] [-n times] [-w interval] [-b n] [-r times][-j depth] [--tee filename] [-f] destination [port]

DESCRIPTION

tcping measures the time it takes to perform a TCP 3-way handshake (SYN, SYN/ACK, ACK) between itself and a remote host.

The travel time of the outgoing final ACK is not included, only the (minimal) amount of time it has taken to drop it on

the wire at the near end. This allows the travel time of the (SYN, SYN/ACK) to approximate the travel time of the

ICMP (request, response) equivalent.

参数

-4 Prefer using IPv4

-6 Prefer using IPv6

-t ping continuously until stopped via control-c

-n count

send _count_ pings and then stop. Default 4.

-i interval

Wait _interval_ seconds between pings. Default 1. Decimals permitted.

-w interval

Wait _interval_ seconds for a response. Default 2. Decimals permitted.

-d include date and time on every output line

-f Force sending at least one byte in addition to making the connection.

-b type

Enable audible beeps.

'-b 1' will beep "on down". If a host was up, but now its not, beep.

'-b 2' will beep "on up". If a host was down, but now its up, beep.

'-b 3' will beep "on change". If a host was one way, but now its the other, beep.

'-b 4' will beep "always".

-r count

Every _count_ pings, we will perform a new DNS lookup for the host in case it changed.

-s Exit immediately upon a success.

-v Print version and exit.

-j depth

Calculate jitter. Jitter is defined as the difference between the last response time and the historical average.

If _depth_ is specified tcping will use the prior _depth_ values to calculate a rolling average. If _depth_ is not

specified tcping will use the overall average.

--tee _filename_

Duplicate output to the _filename_ specified. Windows can still not be depended upon to have a useful command line

environment. Don't tease me, *nix guys.

destination

A DNS name, an IP address, or (in "http" mode) a URL.

Do not specify the protocol ("http://") in "http" mode. Also do not specify server port via ":port" syntax.

For instance: "tcping http://www.elifulkerson.com:8080/index.html" would fail

Use the style: "tcping www.elifulkerson.com/index.html 8080" instead.

port

A numeric TCP port, 1-65535. If not specified, defaults to 80.

HTTP MODE OPTIONS

-h Use "http" mode. In http mode we will attempt to GET the specified document and return additional values including

the document's size, http response code, kbit/s.

-u In "http" mode, include the target URL on each output line.

--post Use POST instead of GET in http mode.

--head Use HEAD instead of GET in http mode.

--get Shorthand to invoke "http" mode for consistency's sake.

--proxy _proxyserver_

Connect to _proxyserver_ to request the url rather than the server indicated in the url itself.

--proxyport _port_

Specify the numeric TCP port of the proxy server. Defaults to 3128.

RETURN VALUE

tcping returns 0 if all pings are successful, 1 if zero pings are successful and 2 for mixed outcome.

BUGS/REQUESTS

Please report bugs and feature requests to the author via contact information on http://www.elifulkerson.com

AVAILABILITY

tcping is available at http://www.elifulkerson.com/projects/tcping.php

D:tcping-devel>tcping www.reddit.com

Probing 72.14.204.104:80/tcp - Port is open - time=23.285ms

Probing 72.14.204.104:80/tcp - Port is open - time=21.651ms

Probing 72.14.204.104:80/tcp - Port is open - time=21.899ms

Probing 72.14.204.104:80/tcp - Port is open - time=21.789ms

Ping statistics for 72.14.204.104:80

4 probes sent.

4 successful, 0 failed.

Approximate trip times in milli-seconds:

Minimum = 21.651ms, Maximum = 23.285ms, Average = 22.156ms

--------------------------------------------------------------------------------

D:tcping-devel>tcping -h www.elifulkerson.com

** Requesting "" from www.elifulkerson.com:

(for various reasons, kbit/s is an approximation)

Probing 64.22.103.201:80/tcp - HTTP is open - time=31.288ms rcv_time=31.951 status=200 bytes=4052 kbit/s=~1014.554

Probing 64.22.103.201:80/tcp - HTTP is open - time=29.553ms rcv_time=30.947 status=200 bytes=4052 kbit/s=~1047.479

Probing 64.22.103.201:80/tcp - HTTP is open - time=29.871ms rcv_time=31.727 status=200 bytes=4052 kbit/s=~1021.728

Probing 64.22.103.201:80/tcp - HTTP is open - time=29.976ms rcv_time=36.002 status=200 bytes=4052 kbit/s=~900.393

Ping statistics for 64.22.103.201:80

4 probes sent.

4 successful, 0 failed.

Approximate trip times in milli-seconds:

Minimum = 29.553ms, Maximum = 31.288ms, Average = 30.172ms

注意事项

在使用的过程中，要根据自己的实际需要好好利用。